Syncthing Configuration¶
Synopsis¶
$HOME/.config/syncthing
$HOME/Library/Application Support/Syncthing
%LOCALAPPDATA%\Syncthing
Description¶
New in version 1.5.0: Database and config can now be set separately. Previously the database was always located in the same directory as the config.
Syncthing uses a single directory to store configuration and crypto keys.
Syncthing also has a database, which is often stored in this directory too.
The config location defaults to $HOME/.config/syncthing
(Unix-like), $HOME/Library/Application Support/Syncthing
(Mac),
or %LOCALAPPDATA%\Syncthing
(Windows). It can be changed at runtime
using the --config
flag. In this directory the following files are
located:
config.xml
The configuration file, in XML format.
cert.pem
,key.pem
The device’s ECDSA public and private key. These form the basis for the device ID. The key must be kept private.
https-cert.pem
,https-key.pem
The certificate and key for HTTPS GUI connections. These may be replaced with a custom certificate for HTTPS as desired.
csrftokens.txt
A list of recently issued CSRF tokens (for protection against browser cross site request forgery).
The database is stored either in the same directory as the config (usually the default), but may also be located in one of the following directories (Unix-like platforms only):
If a database exists in the old default location, that location is still used.
If
$XDG_DATA_HOME
is set, use$XDG_DATA_HOME/syncthing
.If
~/.local/share/syncthing
exists, use that location.Use the old default location (same as config).
The location of the database can be changed using the --data
flag. The
--home
flag sets both config and database locations at the same time.
The database contains the following files:
index-*.db
A directory holding the database with metadata and hashes of the files currently on disk and available from peers.
Config File Format¶
The following shows an example of a default configuration file (IDs will differ):
Note
The config examples are present for illustration. Do not copy them entirely to use as your config. They are likely out-of-date and the values may no longer correspond to the defaults.
<configuration version="35">
<folder id="default" label="Default Folder" path="/Users/jb/Sync/" type="sendreceive" rescanIntervalS="3600" fsWatcherEnabled="true" fsWatcherDelayS="10" ignorePerms="false" autoNormalize="true">
<filesystemType>basic</filesystemType>
<device id="S7UKX27-GI7ZTXS-GC6RKUA-7AJGZ44-C6NAYEB-HSKTJQK-KJHU2NO-CWV7EQW" introducedBy="">
<encryptionPassword></encryptionPassword>
</device>
<minDiskFree unit="%">1</minDiskFree>
<versioning>
<cleanupIntervalS>3600</cleanupIntervalS>
<fsPath></fsPath>
<fsType>basic</fsType>
</versioning>
<copiers>0</copiers>
<pullerMaxPendingKiB>0</pullerMaxPendingKiB>
<hashers>0</hashers>
<order>random</order>
<ignoreDelete>false</ignoreDelete>
<scanProgressIntervalS>0</scanProgressIntervalS>
<pullerPauseS>0</pullerPauseS>
<maxConflicts>-1</maxConflicts>
<disableSparseFiles>false</disableSparseFiles>
<disableTempIndexes>false</disableTempIndexes>
<paused>false</paused>
<weakHashThresholdPct>25</weakHashThresholdPct>
<markerName>.stfolder</markerName>
<copyOwnershipFromParent>false</copyOwnershipFromParent>
<modTimeWindowS>0</modTimeWindowS>
<maxConcurrentWrites>2</maxConcurrentWrites>
<disableFsync>false</disableFsync>
<blockPullOrder>standard</blockPullOrder>
<copyRangeMethod>standard</copyRangeMethod>
<caseSensitiveFS>false</caseSensitiveFS>
<junctionsAsDirs>false</junctionsAsDirs>
</folder>
<device id="S7UKX27-GI7ZTXS-GC6RKUA-7AJGZ44-C6NAYEB-HSKTJQK-KJHU2NO-CWV7EQW" name="syno" compression="metadata" introducer="false" skipIntroductionRemovals="false" introducedBy="">
<address>dynamic</address>
<paused>false</paused>
<autoAcceptFolders>false</autoAcceptFolders>
<maxSendKbps>0</maxSendKbps>
<maxRecvKbps>0</maxRecvKbps>
<ignoredFolder time="2022-01-09T19:09:52Z" id="br63e-wyhb7" label="Foo"></ignoredFolder>
<maxRequestKiB>0</maxRequestKiB>
<untrusted>false</untrusted>
<remoteGUIPort>0</remoteGUIPort>
</device>
<gui enabled="true" tls="false" debugging="false">
<address>127.0.0.1:8384</address>
<apikey>k1dnz1Dd0rzTBjjFFh7CXPnrF12C49B1</apikey>
<theme>default</theme>
</gui>
<ldap></ldap>
<options>
<listenAddress>default</listenAddress>
<globalAnnounceServer>default</globalAnnounceServer>
<globalAnnounceEnabled>true</globalAnnounceEnabled>
<localAnnounceEnabled>true</localAnnounceEnabled>
<localAnnouncePort>21027</localAnnouncePort>
<localAnnounceMCAddr>[ff12::8384]:21027</localAnnounceMCAddr>
<maxSendKbps>0</maxSendKbps>
<maxRecvKbps>0</maxRecvKbps>
<reconnectionIntervalS>60</reconnectionIntervalS>
<relaysEnabled>true</relaysEnabled>
<relayReconnectIntervalM>10</relayReconnectIntervalM>
<startBrowser>true</startBrowser>
<natEnabled>true</natEnabled>
<natLeaseMinutes>60</natLeaseMinutes>
<natRenewalMinutes>30</natRenewalMinutes>
<natTimeoutSeconds>10</natTimeoutSeconds>
<urAccepted>0</urAccepted>
<urSeen>0</urSeen>
<urUniqueID></urUniqueID>
<urURL>https://data.syncthing.net/newdata</urURL>
<urPostInsecurely>false</urPostInsecurely>
<urInitialDelayS>1800</urInitialDelayS>
<restartOnWakeup>true</restartOnWakeup>
<autoUpgradeIntervalH>12</autoUpgradeIntervalH>
<upgradeToPreReleases>false</upgradeToPreReleases>
<keepTemporariesH>24</keepTemporariesH>
<cacheIgnoredFiles>false</cacheIgnoredFiles>
<progressUpdateIntervalS>5</progressUpdateIntervalS>
<limitBandwidthInLan>false</limitBandwidthInLan>
<minHomeDiskFree unit="%">1</minHomeDiskFree>
<releasesURL>https://upgrades.syncthing.net/meta.json</releasesURL>
<overwriteRemoteDeviceNamesOnConnect>false</overwriteRemoteDeviceNamesOnConnect>
<tempIndexMinBlocks>10</tempIndexMinBlocks>
<unackedNotificationID>authenticationUserAndPassword</unackedNotificationID>
<trafficClass>0</trafficClass>
<setLowPriority>true</setLowPriority>
<maxFolderConcurrency>0</maxFolderConcurrency>
<crashReportingURL>https://crash.syncthing.net/newcrash</crashReportingURL>
<crashReportingEnabled>true</crashReportingEnabled>
<stunKeepaliveStartS>180</stunKeepaliveStartS>
<stunKeepaliveMinS>20</stunKeepaliveMinS>
<stunServer>default</stunServer>
<databaseTuning>auto</databaseTuning>
<maxConcurrentIncomingRequestKiB>0</maxConcurrentIncomingRequestKiB>
<announceLANAddresses>true</announceLANAddresses>
<sendFullIndexOnUpgrade>false</sendFullIndexOnUpgrade>
<connectionLimitEnough>0</connectionLimitEnough>
<connectionLimitMax>0</connectionLimitMax>
<insecureAllowOldTLSVersions>false</insecureAllowOldTLSVersions>
</options>
<remoteIgnoredDevice time="2022-01-09T20:02:01Z" id="5SYI2FS-LW6YAXI-JJDYETS-NDBBPIO-256MWBO-XDPXWVG-24QPUM4-PDW4UQU" name="bugger" address="192.168.0.20:22000"></remoteIgnoredDevice>
<defaults>
<folder id="" label="" path="~" type="sendreceive" rescanIntervalS="3600" fsWatcherEnabled="true" fsWatcherDelayS="10" ignorePerms="false" autoNormalize="true">
<filesystemType>basic</filesystemType>
<device id="S7UKX27-GI7ZTXS-GC6RKUA-7AJGZ44-C6NAYEB-HSKTJQK-KJHU2NO-CWV7EQW" introducedBy="">
<encryptionPassword></encryptionPassword>
</device>
<minDiskFree unit="%">1</minDiskFree>
<versioning>
<cleanupIntervalS>3600</cleanupIntervalS>
<fsPath></fsPath>
<fsType>basic</fsType>
</versioning>
<copiers>0</copiers>
<pullerMaxPendingKiB>0</pullerMaxPendingKiB>
<hashers>0</hashers>
<order>random</order>
<ignoreDelete>false</ignoreDelete>
<scanProgressIntervalS>0</scanProgressIntervalS>
<pullerPauseS>0</pullerPauseS>
<maxConflicts>10</maxConflicts>
<disableSparseFiles>false</disableSparseFiles>
<disableTempIndexes>false</disableTempIndexes>
<paused>false</paused>
<weakHashThresholdPct>25</weakHashThresholdPct>
<markerName>.stfolder</markerName>
<copyOwnershipFromParent>false</copyOwnershipFromParent>
<modTimeWindowS>0</modTimeWindowS>
<maxConcurrentWrites>2</maxConcurrentWrites>
<disableFsync>false</disableFsync>
<blockPullOrder>standard</blockPullOrder>
<copyRangeMethod>standard</copyRangeMethod>
<caseSensitiveFS>false</caseSensitiveFS>
<junctionsAsDirs>false</junctionsAsDirs>
</folder>
<device id="" compression="metadata" introducer="false" skipIntroductionRemovals="false" introducedBy="">
<address>dynamic</address>
<paused>false</paused>
<autoAcceptFolders>false</autoAcceptFolders>
<maxSendKbps>0</maxSendKbps>
<maxRecvKbps>0</maxRecvKbps>
<maxRequestKiB>0</maxRequestKiB>
<untrusted>false</untrusted>
<remoteGUIPort>0</remoteGUIPort>
</device>
</defaults>
</configuration>
Configuration Element¶
<configuration version="35">
<folder></folder>
<device></device>
<gui></gui>
<ldap></ldap>
<options></options>
<remoteIgnoredDevice></remoteIgnoredDevice>
<defaults></defaults>
</configuration>
This is the root element. It has one attribute:
- version
The config version. Increments whenever a change is made that requires migration from previous formats.
It contains the elements described in the following sections and any number of this additional child element:
- remoteIgnoredDevice
Contains the ID of the device that should be ignored. Connection attempts from this device are logged to the console but never displayed in the web GUI.
Folder Element¶
<folder id="default" label="Default Folder" path="/Users/jb/Sync/" type="sendreceive" rescanIntervalS="3600" fsWatcherEnabled="true" fsWatcherDelayS="10" ignorePerms="false" autoNormalize="true">
<filesystemType>basic</filesystemType>
<device id="S7UKX27-GI7ZTXS-GC6RKUA-7AJGZ44-C6NAYEB-HSKTJQK-KJHU2NO-CWV7EQW" introducedBy="">
<encryptionPassword></encryptionPassword>
</device>
<minDiskFree unit="%">1</minDiskFree>
<versioning>
<cleanupIntervalS>3600</cleanupIntervalS>
<fsPath></fsPath>
<fsType>basic</fsType>
</versioning>
<copiers>0</copiers>
<pullerMaxPendingKiB>0</pullerMaxPendingKiB>
<hashers>0</hashers>
<order>random</order>
<ignoreDelete>false</ignoreDelete>
<scanProgressIntervalS>0</scanProgressIntervalS>
<pullerPauseS>0</pullerPauseS>
<maxConflicts>-1</maxConflicts>
<disableSparseFiles>false</disableSparseFiles>
<disableTempIndexes>false</disableTempIndexes>
<paused>false</paused>
<weakHashThresholdPct>25</weakHashThresholdPct>
<markerName>.stfolder</markerName>
<copyOwnershipFromParent>false</copyOwnershipFromParent>
<modTimeWindowS>0</modTimeWindowS>
<maxConcurrentWrites>2</maxConcurrentWrites>
<disableFsync>false</disableFsync>
<blockPullOrder>standard</blockPullOrder>
<copyRangeMethod>standard</copyRangeMethod>
<caseSensitiveFS>false</caseSensitiveFS>
<junctionsAsDirs>false</junctionsAsDirs>
</folder>
One or more folder
elements must be present in the file. Each element
describes one folder. The following attributes may be set on the folder
element:
- id
The folder ID, which must be unique. (mandatory)
- label
The label of a folder is a human readable and descriptive local name. May be different on each device, empty, and/or identical to other folder labels. (optional)
- path
The path to the directory where the folder is stored on this device; not sent to other devices. (mandatory)
- type
Controls how the folder is handled by Syncthing. Possible values are:
- sendreceive
The folder is in default mode. Sending local and accepting remote changes. Note that this type was previously called “readwrite” which is deprecated but still accepted in incoming configs.
- sendonly
The folder is in “send only” mode – it will not be modified by Syncthing on this device. Note that this type was previously called “readonly” which is deprecated but still accepted in incoming configs.
- receiveonly
The folder is in “receive only” mode – it will not propagate changes to other devices.
- rescanIntervalS
The rescan interval, in seconds. Can be set to
0
to disable when external plugins are used to trigger rescans.- fsWatcherEnabled
If set to
true
, this detects changes to files in the folder and scans them.
- fsWatcherDelayS
The duration during which changes detected are accumulated, before a scan is scheduled (only takes effect if
fsWatcherEnabled
is set totrue
).- ignorePerms
True if the folder should ignore permissions.
- autoNormalize
Automatically correct UTF-8 normalization errors found in file names.
The following child elements may exist:
- device
These must have the
id
attribute and can have anintroducedBy
attribute, identifying the device that introduced us to share this folder with the given device. If the original introducer unshares this folder with this device, our device will follow and unshare the folder (subject to skipIntroductionRemovals being false on the introducer device). All mentioned devices are those that will be sharing the folder in question. Each mentioned device must have a separatedevice
element later in the file. It is customary that the local device ID is included in all folders. Syncthing will currently add this automatically if it is not present in the configuration file.- minDiskFree
The minimum required free space that should be available on the disk this folder resides. The folder will be stopped when the value drops below the threshold. Accepted units are
%
,kB
,MB
,GB
andTB
. Set to zero to disable.- versioning
Specifies a versioning configuration.
See also
- copiers, pullers, hashers
The number of copier, puller and hasher routines to use, or
0
for the system determined optimums. These are low level performance options for advanced users only; do not change unless requested to or you’ve actually read and understood the code yourself. :)- order
The order in which needed files should be pulled from the cluster. The possibles values are:
- random
Pull files in random order. This optimizes for balancing resources among the devices in a cluster.
- alphabetic
Pull files ordered by file name alphabetically.
- smallestFirst, largestFirst
Pull files ordered by file size; smallest and largest first respectively.
- oldestFirst, newestFirst
Pull files ordered by modification time; oldest and newest first respectively.
Note that the scanned files are sent in batches and the sorting is applied only to the already discovered files. This means the sync might start with a 1 GB file even if there is 1 KB file available on the source device until the 1 KB becomes known to the pulling device.
- ignoreDelete
Warning
Enabling this is highly discouraged - use at your own risk. You have been warned.
When set to
true
, this device will pretend not to see instructions to delete files from other devices.- scanProgressIntervalS
The interval in seconds with which scan progress information is sent to the GUI. Setting to
0
will cause Syncthing to use the default value of two.- pullerPauseS
Tweak for rate limiting the puller when it retries pulling files. Don’t change this unless you know what you’re doing.
- maxConflicts
The maximum number of conflict copies to keep around for any given file. The default,
-1
, means an unlimited number. Setting this to0
disables conflict copies altogether.- disableSparseFiles
By default, blocks containing all zeros are not written, causing files to be sparse on filesystems that support this feature. When set to
true
, sparse files will not be created.- disableTempIndexes
By default, devices exchange information about blocks available in transfers that are still in progress, which allows other devices to download parts of files that are not yet fully downloaded on your own device, essentially making transfers more torrent like. When set to
true
, such information is not exchanged for this folder.- paused
True if this folder is (temporarily) suspended.
- weakHashThresholdPct
Use weak hash if more than the given percentage of the file has changed. Set to
-1
to always use weak hash. Default is25
.- markerName
Name of a directory or file in the folder root to be used as How do I serve a folder from a read only filesystem?. Default is
.stfolder
.- copyOwnershipFromParent
On Unix systems, tries to copy file/folder ownership from the parent directory (the directory it’s located in). Requires running Syncthing as a privileged user, or granting it additional capabilities (e.g. CAP_CHOWN on Linux).
- modTimeWindowS
Allowed modification timestamp difference when comparing files for equivalence. To be used on file systems which have unstable modification timestamps that might change after being recorded during the last write operation. Default is
2
on Android when the folder is located on a FAT partition, and0
otherwise.- maxConcurrentWrites
Maximum number of concurrent write operations while syncing. Increasing this might increase or decrease disk performance, depending on the underlying storage. Default is
2
.
disableFsync
Warning
This is a known insecure option - use at your own risk.
Disables committing file operations to disk before recording them in the database. Disabling fsync can lead to data corruption.
- blockPullOrder
Order in which the blocks of a file are downloaded. This option controls how quickly different parts of the file spread between the connected devices, at the cost of causing strain on the storage.
Available options:
- standard (default):
The blocks of a file are split into N equal continuous sequences, where N is the number of connected devices. Each device starts downloading its own sequence, after which it picks other devices sequences at random. Provides acceptable data distribution and minimal spinning disk strain.
- random:
The blocks of a file are downloaded in a random order. Provides great data distribution, but very taxing on spinning disk drives.
- inOrder:
The blocks of a file are downloaded sequentially, from start to finish. Spinning disk drive friendly, but provides no improvements to data distribution.
- copyRangeMethod
Provides a choice of method for copying data between files. This can be used to optimise copies on network filesystems, improve speed of large copies or clone the data using copy-on-write functionality if the underlying filesystem supports it.
See copyRangeMethod for details.
Device Element¶
<device id="S7UKX27-GI7ZTXS-GC6RKUA-7AJGZ44-C6NAYEB-HSKTJQK-KJHU2NO-CWV7EQW" name="syno" compression="metadata" introducer="false" skipIntroductionRemovals="false" introducedBy="2CYF2WQ-AKZO2QZ-JAKWLYD-AGHMQUM-BGXUOIS-GYILW34-HJG3DUK-LRRYQAR">
<address>dynamic</address>
<paused>false</paused>
<autoAcceptFolders>false</autoAcceptFolders>
<maxSendKbps>0</maxSendKbps>
<maxRecvKbps>0</maxRecvKbps>
<ignoredFolder time="2022-01-09T19:09:52Z" id="br63e-wyhb7" label="Foo"></ignoredFolder>
<maxRequestKiB>0</maxRequestKiB>
<untrusted>false</untrusted>
<remoteGUIPort>0</remoteGUIPort>
</device>
<device id="2CYF2WQ-AKZO2QZ-JAKWLYD-AGHMQUM-BGXUOIS-GYILW34-HJG3DUK-LRRYQAR" name="syno local" compression="metadata" introducer="true" skipIntroductionRemovals="false" introducedBy="">
<address>tcp://192.0.2.1:22001</address>
<paused>true</paused>
<allowedNetwork>192.168.0.0/16</allowedNetwork>
<autoAcceptFolders>false</autoAcceptFolders>
<maxSendKbps>100</maxSendKbps>
<maxRecvKbps>100</maxRecvKbps>
<maxRequestKiB>65536</maxRequestKiB>
<untrusted>false</untrusted>
<remoteGUIPort>8384</remoteGUIPort>
</device>
One or more device
elements must be present in the file. Each element
describes a device participating in the cluster. It is customary to include a
device
element for the local device; Syncthing will currently add one if
it is not present. The following attributes may be set on the device
element:
- id
The device ID. (mandatory)
- name
A friendly name for the device. (optional)
- compression
Whether to use protocol compression when sending messages to this device. The possible values are:
- metadata
Compress metadata packets, such as index information. Metadata is usually very compression friendly so this is a good default.
- always
Compress all packets, including file data. This is recommended if the folders contents are mainly compressible data such as documents or text files.
- never
Disable all compression.
- introducer
Set to true if this device should be trusted as an introducer, i.e. we should copy their list of devices per folder when connecting.
See also
- skipIntroductionRemovals
Set to true if you wish to follow only introductions and not de-introductions. For example, if this is set, we would not remove a device that we were introduced to even if the original introducer is no longer listing the remote device as known.
- introducedBy
Defines which device has introduced us to this device. Used only for following de-introductions.
- certName
The device certificate’s common name, if it is not the default “syncthing”.
From the following child elements at least one address
child must exist.
- address
Contains an address or host name to use when attempting to connect to this device. Entries other than
dynamic
need a protocol specific prefix. For the TCP protocol the prefixestcp://
(dual-stack),tcp4://
(IPv4 only) ortcp6://
(IPv6 only) can be used. The prefixes for the QUIC protocol are analogous:quic://
,quic4://
andquic6://
Note that IP addresses need not use IPv4 or IPv6 prefixes; these are optional. Accepted formats are:- IPv4 address (
tcp://192.0.2.42
) The default port (22000) is used.
- IPv4 address and port (
tcp://192.0.2.42:12345
) The address and port is used as given.
- IPv6 address (
tcp://[2001:db8::23:42]
) The default port (22000) is used. The address must be enclosed in square brackets.
- IPv6 address and port (
tcp://[2001:db8::23:42]:12345
) The address and port is used as given. The address must be enclosed in square brackets.
- Host name (
tcp6://fileserver
) The host name will be used on the default port (22000) and connections will be attempted only via IPv6.
- Host name and port (
tcp://fileserver:12345
) The host name will be used on the given port and connections will be attempted via both IPv4 and IPv6, depending on name resolution.
dynamic
The word
dynamic
(without any prefix) means to use local and global discovery to find the device.
You can set multiple addresses and combine it with the
dynamic
keyword for example:<device id="..."> <address>tcp://192.0.2.1:22001</address> <address>quic://192.0.1.254:22000</address> <address>dynamic</address> </device>
- IPv4 address (
- paused
True if synchronization with this devices is (temporarily) suspended.
- allowedNetwork
If given, this restricts connections to this device to only this network (see allowedNetworks).
- maxSendKbps
Maximum send rate to use for this device. Unit is kibibytes/second, despite the config name looking like kilobits/second.
- maxRecvKbps
Maximum receive rate to use for this device. Unit is kibibytes/second, despite the config name looking like kilobits/second.
- ignoredFolder
Contains the ID of the folder that should be ignored. This folder will always be skipped when advertised from the containing remote device, i.e. this will be logged, but there will be no dialog shown in the web GUI.
- maxRequestKiB
Maximum amount of data to have outstanding in requests towards this device. Unit is kibibytes.
- remoteGUIPort
If set to a positive integer, the GUI will display an HTTP link to the IP address which is currently used for synchronization. Only the TCP port is exchanged for the value specified here. Note that any port forwarding or firewall settings need to be done manually and the link will probably not work for link-local IPv6 addresses because of modern browser limitations.
GUI Element¶
<gui enabled="true" tls="false" debugging="false">
<address>127.0.0.1:8384</address>
<apikey>k1dnz1Dd0rzTBjjFFh7CXPnrF12C49B1</apikey>
<theme>default</theme>
</gui>
There must be exactly one gui
element. The GUI configuration is also used
by the REST API and the Event API. The following attributes may
be set on the gui
element:
- enabled
If not
true
, the GUI and API will not be started.- tls
If set to
true
, TLS (HTTPS) will be enforced. Non-HTTPS requests will be redirected to HTTPS. When set tofalse
, TLS connections are still possible but not required.- debugging
This enables Profiling and additional debugging endpoints in the REST API.
The following child elements may be present:
- address
Set the listen address. Exactly one address element must be present. Allowed address formats are:
- IPv4 address and port (
127.0.0.1:8384
) The address and port are used as given.
- IPv6 address and port (
[::1]:8384
) The address and port are used as given. The address must be enclosed in square brackets.
- Wildcard and port (
0.0.0.0:12345
,[::]:12345
,:12345
) These are equivalent and will result in Syncthing listening on all interfaces via both IPv4 and IPv6.
- UNIX socket location (
/var/run/st.sock
) If the address is an absolute path it is interpreted as the path to a UNIX socket.
- IPv4 address and port (
- unixSocketPermissions
When
address
is set to a UNIX socket location, set this to an octal value to override the default permissions of the socket.- user
Set to require authentication.
- password
Contains the bcrypt hash of the real password.
- apikey
If set, this is the API key that enables usage of the REST interface.
- insecureAdminAccess
If true, this allows access to the web GUI from outside (i.e. not localhost) without authorization. A warning will displayed about this setting on startup.
- theme
The name of the theme to use.
- authMode
Authentication mode to use. If not present, the authentication mode (static) is controlled by the presence of user/password fields for backward compatibility.
- static
Authentication using user and password.
- ldap
LDAP authentication. Requires ldap top level config section to be present.
LDAP Element¶
<ldap>
<address>localhost:389</address>
<bindDN>cn=%s,ou=users,dc=syncthing,dc=net</bindDN>
<transport>nontls</transport>
<insecureSkipVerify>false</insecureSkipVerify>
</ldap>
The ldap
element contains LDAP configuration options.
- address
LDAP server address (server:port).
- bindDN
BindDN for user authentication. Special
%s
variable should be used to pass username to LDAP.
transport
- nontls
Non secure connection.
- tls
TLS secured connection.
- starttls
StartTLS connection mode.
- insecureSkipVerify
Skip verification (
true
orfalse
).
Options Element¶
<options>
<listenAddress>default</listenAddress>
<globalAnnounceServer>default</globalAnnounceServer>
<globalAnnounceEnabled>true</globalAnnounceEnabled>
<localAnnounceEnabled>true</localAnnounceEnabled>
<localAnnouncePort>21027</localAnnouncePort>
<localAnnounceMCAddr>[ff12::8384]:21027</localAnnounceMCAddr>
<maxSendKbps>0</maxSendKbps>
<maxRecvKbps>0</maxRecvKbps>
<reconnectionIntervalS>60</reconnectionIntervalS>
<relaysEnabled>true</relaysEnabled>
<relayReconnectIntervalM>10</relayReconnectIntervalM>
<startBrowser>true</startBrowser>
<natEnabled>true</natEnabled>
<natLeaseMinutes>60</natLeaseMinutes>
<natRenewalMinutes>30</natRenewalMinutes>
<natTimeoutSeconds>10</natTimeoutSeconds>
<urAccepted>0</urAccepted>
<urSeen>0</urSeen>
<urUniqueID></urUniqueID>
<urURL>https://data.syncthing.net/newdata</urURL>
<urPostInsecurely>false</urPostInsecurely>
<urInitialDelayS>1800</urInitialDelayS>
<restartOnWakeup>true</restartOnWakeup>
<autoUpgradeIntervalH>12</autoUpgradeIntervalH>
<upgradeToPreReleases>false</upgradeToPreReleases>
<keepTemporariesH>24</keepTemporariesH>
<cacheIgnoredFiles>false</cacheIgnoredFiles>
<progressUpdateIntervalS>5</progressUpdateIntervalS>
<limitBandwidthInLan>false</limitBandwidthInLan>
<minHomeDiskFree unit="%">1</minHomeDiskFree>
<releasesURL>https://upgrades.syncthing.net/meta.json</releasesURL>
<overwriteRemoteDeviceNamesOnConnect>false</overwriteRemoteDeviceNamesOnConnect>
<tempIndexMinBlocks>10</tempIndexMinBlocks>
<unackedNotificationID>authenticationUserAndPassword</unackedNotificationID>
<trafficClass>0</trafficClass>
<setLowPriority>true</setLowPriority>
<maxFolderConcurrency>0</maxFolderConcurrency>
<crashReportingURL>https://crash.syncthing.net/newcrash</crashReportingURL>
<crashReportingEnabled>true</crashReportingEnabled>
<stunKeepaliveStartS>180</stunKeepaliveStartS>
<stunKeepaliveMinS>20</stunKeepaliveMinS>
<stunServer>default</stunServer>
<databaseTuning>auto</databaseTuning>
<maxConcurrentIncomingRequestKiB>0</maxConcurrentIncomingRequestKiB>
<announceLANAddresses>true</announceLANAddresses>
<sendFullIndexOnUpgrade>false</sendFullIndexOnUpgrade>
<connectionLimitEnough>0</connectionLimitEnough>
<connectionLimitMax>0</connectionLimitMax>
<insecureAllowOldTLSVersions>false</insecureAllowOldTLSVersions>
</options>
The options
element contains all other global configuration options.
- listenAddress
The listen address for incoming sync connections. See Listen Addresses for the allowed syntax.
- globalAnnounceServer
A URI to a global announce (discovery) server, or the word
default
to include the default servers. Any number of globalAnnounceServer elements may be present. The syntax for non-default entries is that of an HTTP or HTTPS URL. A number of options may be added as query options to the URL:insecure
to prevent certificate validation (required for HTTP URLs) andid=<device ID>
to perform certificate pinning. The device ID to use is printed by the discovery server on startup.- globalAnnounceEnabled
Whether to announce this device to the global announce (discovery) server, and also use it to look up other devices.
- localAnnounceEnabled
Whether to send announcements to the local LAN, also use such announcements to find other devices.
- localAnnouncePort
The port on which to listen and send IPv4 broadcast announcements to.
- localAnnounceMCAddr
The group address and port to join and send IPv6 multicast announcements on.
- maxSendKbps
Outgoing data rate limit, in kibibytes per second.
- maxRecvKbps
Incoming data rate limits, in kibibytes per second.
- reconnectionIntervalS
The number of seconds to wait between each attempt to connect to currently unconnected devices.
- relaysEnabled
When
true
, relays will be connected to and potentially used for device to device connections.- relayReconnectIntervalM
Sets the interval, in minutes, between relay reconnect attempts.
- startBrowser
Whether to attempt to start a browser to show the GUI when Syncthing starts.
- natEnabled
Whether to attempt to perform a UPnP and NAT-PMP port mapping for incoming sync connections.
- natLeaseMinutes
Request a lease for this many minutes; zero to request a permanent lease.
- natRenewalMinutes
Attempt to renew the lease after this many minutes.
- natTimeoutSeconds
When scanning for UPnP devices, wait this long for responses.
- urAccepted
Whether the user has accepted to submit anonymous usage data. The default,
0
, mean the user has not made a choice, and Syncthing will ask at some point in the future.-1
means no, a number above zero means that that version of usage reporting has been accepted.- urSeen
The highest usage reporting version that has already been shown in the web GUI.
- urUniqueID
The unique ID sent together with the usage report. Generated when usage reporting is enabled.
- urURL
The URL to post usage report data to, when enabled.
- urPostInsecurely
When true, the UR URL can be http instead of https, or have a self-signed certificate. The default is
false
.- urInitialDelayS
The time to wait from startup for the first usage report to be sent. Allows the system to stabilize before reporting statistics.
- restartOnWakeup
Whether to perform a restart of Syncthing when it is detected that we are waking from sleep mode (i.e. an unfolding laptop).
- autoUpgradeIntervalH
Check for a newer version after this many hours. Set to
0
to disable automatic upgrades.- upgradeToPreReleases
If
true
, automatic upgrades include release candidates (see Versions & Releases).- keepTemporariesH
Keep temporary failed transfers for this many hours. While the temporaries are kept, the data they contain need not be transferred again.
- cacheIgnoredFiles
Whether to cache the results of ignore pattern evaluation. Performance at the price of memory. Defaults to
false
as the cost for evaluating ignores is usually not significant.- progressUpdateIntervalS
How often in seconds the progress of ongoing downloads is made available to the GUI.
- limitBandwidthInLan
Whether to apply bandwidth limits to devices in the same broadcast domain as the local device.
- minHomeDiskFree
The minimum required free space that should be available on the partition holding the configuration and index. Accepted units are
%
,kB
,MB
,GB
andTB
.- releasesURL
The URL from which release information is loaded, for automatic upgrades.
- alwaysLocalNet
Network that should be considered as local given in CIDR notation.
- overwriteRemoteDeviceNamesOnConnect
If set, device names will always be overwritten with the name given by remote on each connection. By default, the name that the remote device announces will only be adopted when a name has not already been set.
- tempIndexMinBlocks
When exchanging index information for incomplete transfers, only take into account files that have at least this many blocks.
- unackedNotificationID
ID of a notification to be displayed in the web GUI. Will be removed once the user acknowledged it (e.g. an transition notice on an upgrade).
- trafficClass
Specify a type of service (TOS)/traffic class of outgoing packets.
- stunServer
Server to be used for STUN, given as ip:port. The keyword
default
gets expanded tostun.callwithus.com:3478
,stun.counterpath.com:3478
,stun.counterpath.net:3478
,stun.ekiga.net:3478
,stun.ideasip.com:3478
,stun.internetcalls.com:3478
,stun.schlund.de:3478
,stun.sipgate.net:10000
,stun.sipgate.net:3478
,stun.voip.aebc.com:3478
,stun.voiparound.com:3478
,stun.voipbuster.com:3478
,stun.voipstunt.com:3478
andstun.xten.com:3478
(this is the default).- stunKeepaliveSeconds
Interval in seconds between contacting a STUN server to maintain NAT mapping. Default is
24
and you can set it to0
to disable contacting STUN servers.
- setLowPriority
Syncthing will attempt to lower its process priority at startup. Specifically: on Linux, set itself to a separate process group, set the niceness level of that process group to nine and the I/O priority to best effort level five; on other Unixes, set the process niceness level to nine; on Windows, set the process priority class to below normal. To disable this behavior, for example to control process priority yourself as part of launching Syncthing, set this option to
false
.
Defaults Element¶
<defaults>
<folder id="" label="" path="~" type="sendreceive" rescanIntervalS="3600" fsWatcherEnabled="true" fsWatcherDelayS="10" ignorePerms="false" autoNormalize="true">
<filesystemType>basic</filesystemType>
<device id="S7UKX27-GI7ZTXS-GC6RKUA-7AJGZ44-C6NAYEB-HSKTJQK-KJHU2NO-CWV7EQW" introducedBy="">
<encryptionPassword></encryptionPassword>
</device>
<minDiskFree unit="%">1</minDiskFree>
<versioning>
<cleanupIntervalS>3600</cleanupIntervalS>
<fsPath></fsPath>
<fsType>basic</fsType>
</versioning>
<copiers>0</copiers>
<pullerMaxPendingKiB>0</pullerMaxPendingKiB>
<hashers>0</hashers>
<order>random</order>
<ignoreDelete>false</ignoreDelete>
<scanProgressIntervalS>0</scanProgressIntervalS>
<pullerPauseS>0</pullerPauseS>
<maxConflicts>10</maxConflicts>
<disableSparseFiles>false</disableSparseFiles>
<disableTempIndexes>false</disableTempIndexes>
<paused>false</paused>
<weakHashThresholdPct>25</weakHashThresholdPct>
<markerName>.stfolder</markerName>
<copyOwnershipFromParent>false</copyOwnershipFromParent>
<modTimeWindowS>0</modTimeWindowS>
<maxConcurrentWrites>2</maxConcurrentWrites>
<disableFsync>false</disableFsync>
<blockPullOrder>standard</blockPullOrder>
<copyRangeMethod>standard</copyRangeMethod>
<caseSensitiveFS>false</caseSensitiveFS>
<junctionsAsDirs>false</junctionsAsDirs>
</folder>
<device id="" compression="metadata" introducer="false" skipIntroductionRemovals="false" introducedBy="">
<address>dynamic</address>
<paused>false</paused>
<autoAcceptFolders>false</autoAcceptFolders>
<maxSendKbps>0</maxSendKbps>
<maxRecvKbps>0</maxRecvKbps>
<maxRequestKiB>0</maxRequestKiB>
<untrusted>false</untrusted>
<remoteGUIPort>0</remoteGUIPort>
</device>
</defaults>
The defaults
element describes a template for newly added device and folder
options. These will be used when adding a new remote device or folder, either
through the GUI or the command line interface. The following child elements can
be present in the defaults
element:
- device
Template for a
device
element, with the same internal structure. Any fields here will be used for a newly added remote device. Theid
attribute is meaningless in this context.- folder
Template for a
folder
element, with the same internal structure. Any fields here will be used for a newly added shared folder. Theid
attribute is meaningless in this context.The UI will propose to create new folders at the path given in the
path
attribute (used to bedefaultFolderPath
underoptions
). It also applies to folders automatically accepted from a remote device.Even sharing with other remote devices can be done in the template by including the appropriate
device
element underneath.
Listen Addresses¶
The following address types are accepted in sync protocol listen addresses.
If you want Syncthing to listen on multiple addresses, you can either: add
multiple <listenAddress>
tags in the configuration file or enter several
addresses separated by commas in the GUI.
- Default listen addresses (
default
) This is equivalent to
tcp://0.0.0.0:22000
,quic://0.0.0.0:22000
anddynamic+https://relays.syncthing.net/endpoint
.- TCP wildcard and port (
tcp://0.0.0.0:22000
,tcp://:22000
) These are equivalent and will result in Syncthing listening on all interfaces, IPv4 and IPv6, on the specified port.
- TCP IPv4 wildcard and port (
tcp4://0.0.0.0:22000
,tcp4://:22000
) These are equivalent and will result in Syncthing listening on all interfaces via IPv4 only.
- TCP IPv4 address and port (
tcp4://192.0.2.1:22000
) This results in Syncthing listening on the specified address and port, IPv4 only.
- TCP IPv6 wildcard and port (
tcp6://[::]:22000
,tcp6://:22000
) These are equivalent and will result in Syncthing listening on all interfaces via IPv6 only.
- TCP IPv6 address and port (
tcp6://[2001:db8::42]:22000
) This results in Syncthing listening on the specified address and port, IPv6 only.
- QUIC address and port (e.g.
quic://0.0.0.0:22000
) Syntax is the same as for TCP, also
quic4
andquic6
can be used.- Static relay address (
relay://192.0.2.42:22067?id=abcd123...
) Syncthing will connect to and listen for incoming connections via the specified relay address.
Todo
Document available URL parameters.
- Dynamic relay pool (
dynamic+https://192.0.2.42/relays
) Syncthing will fetch the specified HTTPS URL, parse it for a JSON payload describing relays, select a relay from the available ones and listen via that as if specified as a static relay above.
Todo
Document available URL parameters.
Syncing Configuration Files¶
Syncing configuration files between devices (such that multiple devices are using the same configuration files) can cause issues. This is easy to do accidentally if you sync your home folder between devices. A common symptom of syncing configuration files is two devices ending up with the same Device ID.
If you want to use Syncthing to backup your configuration files, it is recommended that the files you are backing up are in a Send Only Folder to prevent other devices from overwriting the per device configuration. The folder on the remote device(s) should not be used as configuration for the remote devices.
If you’d like to sync your home folder in non-send only mode, you may add the folder that stores the configuration files to the ignore list. If you’d also like to backup your configuration files, add another folder in send only mode for just the configuration folder.